GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
2. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a)
Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.
(b) Install the shift lock control ECU sub-assembly with the 2 screws.
(c)
Install the shift lever guide housing with the shift lever lock pin and a new shift lever nut.
NOTICE:
^
Install the shift lever nut and lock pin after first engaging the 2 claws.
^
Securely engage the claws.
(d) Connect the transmission control switch connector to the floor shift assembly.