GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(f)
Remove the 2 bolts and shift lever position sensor.
INSPECTION
1. INSPECT SHIFT LEVER POSITION SENSOR
(a)
Measure the resistance according to the value(s) in the table when the shift lever is moved to each position.
Standard resistance
If operation cannot be done as specified, replace the shift lever position sensor.
ADJUSTMENT
1. ADJUST SHIFT LEVER POSITION SENSOR
(a)
Set the shift lever to the N position.
(b) Remove the nut and transmission control shaft lever.