GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
19. REMOVE REAR HEIGHT CONTROL SENSOR LH
(a)
Disconnect the height control sensor connector.
(b) Remove the clamp from the rear suspension member.
20. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER LH
(a)
Remove the 4 bolts and suspension member brace rear lower LH.
21. REMOVE REAR SUSPENSION MEMBER BRACE REAR LOWER RH
HINT:
Use the same procedures for the RH side and LH side.
22. REMOVE REAR SUSPENSION MEMBER ASSEMBLY
(a)
Support the rear suspension member with a jack.
HINT:
Remove the rear suspension member along with the differential carrier assembly rear.
(b) Remove the 8 bolts, 2 rear suspension member stoppers, 2 differential support member stoppers and rear suspension member stopper lowers
from the rear suspension member.
(c)
Lower the jack slowly and remove the rear suspension member with the differential carrier assembly rear.
23. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY