GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
^
Confirm that SST contacts the entire bush surface of the mount cushion.
3. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
(a)
Support the rear differential carrier with a jack.
NOTICE:
Do not drop the differential carrier.
(b) Using a 12 mm hexagon wrench, temporarily install the differential carrier to the suspension member with 3 new bolts.
(c)
Install the mount stopper upper and mount stopper lower. Temporarily install the differential carrier rear to the suspension member with 2
new bolts.
(d) Using a 12 mm hexagon wrench and torque wrench, tighten the 3 bolts to the specified torque.
Torque: 142 N*m (1,450 kgf*cm, 105 ft.*lbf)
(e)
Using a torque wrench, tighten 2 bolts to the specified torque.