GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(c)
Loosen the 2 bolts of the shift lever position sensor.
(d) Align the groove and the neutral alignment mark line.
(e)
Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(f)
After adjustment, perform the inspection.
(g) Install the transmission control shaft lever with the nut.
Torque: 16 N*m (163 kgf*cm, 12 ft.*lbf)
INSTALLATION
1. INSTALL SHIFT LEVER POSITION SENSOR
(a)
Install the shift lever position sensor to the hybrid transmission.
(b) Temporarily install the 2 bolts.
HINT:
Fully tighten the bolts with the neutral alignment mark line aligned with the groove. [*1]
(c)
Install a new lock washer and the nut.
Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf)