GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
(h) Using a screwdriver, bend the tabs of the lock washer.
NOTICE:
Make sure that the nut is held firmly.
(i)
Install the transmission control shaft lever with the nut. [*2]
Torque: 16 N*m (163 kgf*cm, 12 ft.*lbf)
(j)
Connect the shift lever position sensor connector.
2. INSTALL REAR ENGINE MOUNTING INSULATOR ASSEMBLY
(a)
Tilt up the hybrid vehicle transmission assembly.
(b) Install the rear engine mounting insulator to the body with the 4 bolts.
Torque: 26 N*m (260 kgf*cm, 19 ft.*lbf)