GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
8. REMOVE HEADLIGHT CLEANER ACTUATOR SUB-ASSEMBLY
a. Remove the 2 screws and actuator.
9. REMOVE HEADLIGHT CLEANER HOSE
a. Disconnect the hose from the headlight cleaner motor and pump.
b. Using a screwdriver, detach the 5 clamps and remove the hose.
HINT: Tape the screwdriver tip before use.
INSTALLATION
HINT:
-
Use the same procedures for both the RH and LH side.
-
The procedures listed below are for the LH side.
1. INSTALL HEADLIGHT CLEANER HOSE
a. Attach the 5 clamps and install the hose to the front bumper reinforcement.
b. Connect the hose to the headlight cleaner motor and pump.