GS 460 V8-4.6L (1UR-FSE) (2008)
(c) Connect the camshaft timing oil control valve connector.
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
4. INSTALL NO. 1 AIR CLEANER INLET See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
5. INSTALL V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
6. INSTALL ENGINE ROOM SIDE COVER RH See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
7. INSTALL ENGINE ROOM SIDE COVER LH See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
8. INSTALL COOL AIR INTAKE DUCT SEAL See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming and
Relearning/Steering Initialization.