GS 460 V8-4.6L (1UR-FSE) (2008)
NOTICE:
-
The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape.
-
When installing them, connect the connectors of the same color.
2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY
(a) Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.
(b) Tighten the 2 tapered-head bolts until the bolt heads break off.
3. INSTALL STEERING COLUMN ASSEMBLY (for 2GR-FSE)
HINT:
Refer to the instructions for Installation of the steering column assembly (2GR-FSE) See: Steering Column/Service and Repair/Removal and
Replacement/Installation.
4. INSTALL STEERING COLUMN ASSEMBLY (for 1UR-FSE)
HINT:
Refer to the instructions for Installation of the steering column assembly (1UR-FSE) See: Steering Column/Service and Repair/Removal and
Replacement/Installation.