GX 470 V8-4.7L (2UZ-FE) (2004)
Accessory Control Display: Service and Repair
Multi-Display Controller Sub-Assy
REPLACEMENT
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE COWL SIDE TRIM BOARD RH
3. REMOVE MULTI-DISPLAY CONTROLLER W/BRACKET
a. Disconnect the connectors.
b. Remove the 2 nuts, and multi-display controller W/ bracket.
4. REMOVE TELEVISION DISPLAY BRACKET A
a. Remove the 3 screws, and television display bracket A.
5. REMOVE TELEVISION DISPLAY BRACKET B
a. Remove the 2 screws, and television display bracket B.