GX 470 V8-4.7L (2UZ-FE) (2004)
9. INSTALL WINDSHIELD WIPER MOTOR ASSY
a. Apply MP grease to the crank arm pivot of the windshield wiper motor assy.
b. Install the windshield wiper motor assy to the windshield wiper link assy with the 2 torx bolts.
Torque: 7.5 Nm (76 kgf.cm, 66 in.lbf)
10. INSTALL WINDSHIELD WIPER MOTOR & LINK ASSY
a. Slide the wiper motor assy to the driver's seat side as shown in the illustration and engage the rubber pin with the body.
b. Install the windshield wiper link assy with the 2 bolts.
Torque: 7.0 Nm (71 kgf.cm, 62 in.lbf)
c. Connect the connector.
11. INSTALL FR WIPER ARM LH