HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Antenna Cable: Service and Repair
Removal
AUDIO / VIDEO: RADIO ANTENNA CORD: REMOVAL
1. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
(a) Remove the lower instrument panel sub-assembly See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Lower Instrument Panel/Removal.
2. REMOVE ANTENNA CORD SUB-ASSEMBLY
(a) w/o Manual (SOS) Switch:
(1) Disconnect the connector.
(b) w/ Manual (SOS) Switch:
(1) Disconnect the 2 connectors.
(c) Remove the nut.
(d) Disengage the 2 clamps and remove the antenna cord sub-assembly.
3. REMOVE ROOF HEADLINING ASSEMBLY
(a) Remove the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal.
4. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
(a) Peel the strips of tape used to secure the antenna cord only to the extent that allows removal of the No. 2 antenna cord sub-assembly.
HINT
Tape is not available as a supply part. Try to leave as much tape as possible on the roof headlining so that the tape can be reused.
(b) Remove the No. 2 antenna cord sub-assembly from the roof headlining.