HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(3) Apply the double-sided tape to the roof headlining while aligning the tape with the markings on the roof headlining assembly.
(4) Peel off the release paper from the double-sided tape.
(b) Install the No. 2 antenna cord sub-assembly to the roof headlining assembly from the front of the vehicle.
Text in Illustration
HINT
Align the taped part of the antenna cable with the protrusion of the roof headlining, and apply tape to secure the cable to the
headlining.
(c) Put the strips of the tape back to the positions shown in the illustration in order to secure the antenna cord to the roof headlining assembly.
HINT
*
If the tape is no longer sticky, use other tape, such as packing tape, that has enough adhesion to secure the antenna cord to the
roof headlining assembly.
*
For the right front corner of the roof headlining assembly, align the marking tape on the antenna cord with the protrusion of the
roof headlining, and wrap tape around the antenna cord and roof headlining assembly once or twice to securely hold them.
*
For the right rear corner of the roof headlining assembly, align the marking tape on the antenna cord with the rear edge of the
roof headlining, and secure the antenna cord to the roof headlining assembly with tape.
3. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
4. INSTALL ANTENNA CORD SUB-ASSEMBLY
(a) Engage the 2 clamps.
(b) w/o Manual (SOS) Switch:
(1) Connect the connector.
(c) w/ Manual (SOS) Switch:
(1) Connect the 2 connectors.