HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(b) Remove the bolt and No. 2 door control receiver.
Installation
DOOR LOCK: DOOR CONTROL RECEIVER (for Luggage Compartment): INSTALLATION
1. INSTALL NO. 2 DOOR CONTROL RECEIVER
(a) Install the No. 2 door control receiver with the bolt.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the connector.
2. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Installation.
3. INSTALL ROPE HOOK
HINT
Use the same procedure for the RH side and LH side See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Installation.
4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Installation
5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Installation
6. INSTALL REAR FLOOR FINISH PLATE See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and Replacement/Installation
7. INSTALL TOOL WITH STAY BOX SUB-ASSEMBLY
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation