HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Exterior View Display Monitor: Service and Repair
Installation
PRE-COLLISION: DRIVER MONITOR CAMERA: INSTALLATION
1. INSTALL DRIVER MONITOR CAMERA
(a) Engage the 2 claws to temporarily install the driver monitor camera to the upper steering column cover.
(b) Install the driver monitor camera with the 3 screws.
2. INSTALL UPPER STEERING COLUMN COVER See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
3. INSTALL LOWER STEERING COLUMN COVER See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Wiper
Switch/Service and Repair/Installation
4. INSTALL LOWER NO. 2 STEERING COLUMN COVER See: Sensors and Switches/Sensors and Switches - Wiper and Washer
Systems/Wiper Switch/Service and Repair/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Column Assembly (for Power Tilt and Power Telescopic Steering Column)/Installation
6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation