HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-2362001.png)
Lane Departure System: Reading and Clearing Diagnostic Trouble Codes
CRUISE CONTROL: LANE-KEEPING ASSIST SYSTEM: DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: All ECUs / Lane Keeping Assist / Trouble Codes.
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: All ECUs / Lane Keeping Assist / Trouble Codes.
(e) Clear the DTCs.