HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(c) Reconnect the driving support ECU connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (SPIRAL CABLE - DRIVING SUPPORT ECU)
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (BODY GROUND CIRCUIT)
(a) Disconnect the spiral cable connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(c) Reconnect the connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (BODY GROUND CIRCUIT)
OK -- Continue to next step.
5. INSPECT DRIVING SUPPORT ECU
(a) Turn the power switch on (IG).
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage: