HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL RETAINER
Reassembly
NAVIGATION / MULTI INFO DISPLAY: REMOTE TOUCH: REASSEMBLY
1. INSTALL INSTRUMENT CLUSTER FINISH PANEL RETAINER
2. INSTALL REMOTE OPERATION BOARD
(a) Connect the connector.
(b) Install the remote operation board with the 6 screws.
3. INSTALL NO. 4 INSTRUMENT PANEL FINISH PANEL RETAINER
(a) Install the No. 4 instrument panel finish panel retainer with the 6 screws.
4. INSTALL DOME COVER
(a) Install the dome cover as shown in the illustration.
5. INSTALL REMOTE CONTROL COVER ASSEMBLY
(a) Engage the 2 clips and install the remote control cover assembly.
6. INSTALL REMOTE OPERATION KNOB SUB-ASSEMBLY