HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Navigation Function Selector Switch: Testing and Inspection
NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY SWITCH: INSPECTION
1. INSPECT TELLTALE LIGHT ASSEMBLY (MULTI-DISPLAY SWITCH)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Check the illumination
(1) Connect a positive (+) lead to terminal ILL+ and a negative (-) lead to terminal ILL- of the telltale light assembly connector.
(2) Check that the multi-display switch illumination comes on.
OK:
Multi-display switch illumination comes on.