HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 10 Speakers) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
7. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 15 Speakers) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
8. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY
(a) Remove the 2 bolts.
(b) Lift the front No. 3 speaker assembly and disconnect the connector to remove the speaker.
NOTICE:
Do not touch the cone part of the speaker.
Installation
AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION
1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
(a) Connect the connector.
(b) Install the front No. 2 speaker assembly with the 2 bolts.
NOTICE:
Do not touch the cone part of the speaker.
HINT
Install the bolts in the order shown in the illustration.
2. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for 10 Speakers) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
3. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for 15 Speakers) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
4. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
(a) Connect the connector.
(b) Install the front No. 3 speaker assembly with the 2 bolts.
NOTICE:
Do not touch the cone part of the speaker.