HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Navigation Function Selector Switch: Service and Repair
Removal
NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY SWITCH: REMOVAL
1. PRECAUTION
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
6. REMOVE REMOTE TOUCH ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Removal
7. REMOVE MULTI-DISPLAY SWITCH
(a) Disengage the 4 claws to remove the multi-display switch.