HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Fuel Door Release Actuator: Service and Repair
Installation
DOOR / HATCH: FUEL LID OPENER MOTOR ASSEMBLY: INSTALLATION
1. INSTALL FUEL LID OPENER MOTOR ASSEMBLY
(a) Install the fuel lid opener motor assembly with the nut.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Engage the 2 claws.
(c) Connect the connector.
2. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Installation
3. INSTALL ROPE HOOK See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and Replacement/Installation
4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and
Replacement/Installation
5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Installation
6. INSTALL REAR FLOOR FINISH PLATE See: Lighting and Horns/Backup Lamp/Service and Repair/Removal and Replacement/Installation
7. INSTALL TOOL WITH STAY BOX SUB-ASSEMBLY
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation