HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from
the negative (-) battery terminal.
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Steering Pad/Removal
4. REMOVE FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal.
5. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal.
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
7. REMOVE COWL SIDE TRIM BOARD RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal.
8. REMOVE INSTRUMENT SIDE PANEL RH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Upper Instrument Panel/Removal
9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Removal
10. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Removal
11. REMOVE LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH
(a) Disengage the 2 claws and remove the luggage compartment door opener main switch as shown in the illustration.
Installation
DOOR / HATCH: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: INSTALLATION
1. INSTALL LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH
(a) Engage the 2 claws and install the luggage compartment door opener main switch as shown in the illustration.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Installation
3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation