HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(d) Apply lubricant to the contact surfaces between the front upper body mounting cushion and front suspension crossmember sub-assembly.
(e) Repeat the above 2 steps and remove the front upper body mounting cushion.
NOTICE:
*
Be careful when removing the cushion because it may unexpectedly pop out.
*
Do not reuse the front suspension member body mounting front cushion.
35. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION
(a) Apply lubricant to the contact surface of the front suspension member body mounting rear cushion.
(b) Position and firmly secure SST as shown in the illustration.
SST : 09710-28031
09711-02030
09711-02040
94622-51200
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04031
SST : 09950-60010
09951-00320
(c) Using SST, slightly lower the front suspension member body mounting rear cushion.
(d) Apply lubricant to the contact surface between the front suspension member body mounting rear cushion and front suspension crossmember
sub-assembly.
(e) Repeat the above 2 steps and remove the front suspension member body mounting rear cushion.