HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
18. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Disassembly
19. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Disassembly
Installation
DOOR LOCK: REAR DOOR LOCK: INSTALLATION
1. INSTALL REAR DOOR INSIDE LOCKING CABLE ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Reassembly
2. INSTALL REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Reassembly
3. INSTALL REAR DOOR LOCK ASSEMBLY
NOTICE:
*
When reusing the removed rear door lock assembly, replace the door lock wiring harness seal on the connector with a new one.
*
Do not allow grease or dust to adhere to the door lock wiring harness seal surface of the connector.
*
Reusing the door lock wiring harness seal or using a damaged door lock wiring harness seal may cause water intrusion. This may
result in a malfunction of the rear door lock assembly.
(a) Apply MP grease to the sliding parts of the rear door lock assembly.
(b) Install a new door lock wiring harness seal to the rear door lock assembly.
(c) Insert the rear door lock assembly to the rear door outside handle frame release plate, and set it to the rear door panel.
(d) Make sure that the rear door outside handle frame release plate is securely connected to the rear door lock assembly.
(e) Using a T30 "TORX" socket wrench, install the rear door lock assembly with the 3 screws.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
(f) Engage the rear door lock remote control cable assembly and rear door inside locking cable assembly.
4. INSTALL REAR DOOR GLASS SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Reassembly
5. INSTALL REAR DOOR QUARTER WINDOW GLASS WITH WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Reassembly
6. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Reassembly
7. INSTALL NO. 2 REAR DOOR VENT SEAL See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Reassembly
8. INSTALL REAR DOOR GLASS RUN See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Reassembly
9. INSTALL REAR DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Reassembly
10. INSTALL REAR DOOR ARMREST SET BRACKET See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Reassembly