HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Power Door Lock Actuator: Testing and Inspection
Rear Door Lock
DOOR LOCK: REAR DOOR LOCK: INSPECTION
1. INSPECT REAR DOOR LOCK ASSEMBLY LH
(a) Check the operation of the door lock motor.
(1) Apply auxiliary battery voltage and check the operation of the door lock motor.
OK:
Text in Illustration
(2) If the result is not as specified, replace the rear door lock assembly LH.
(b) Check the operation of the unlock detection switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration