HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
4. INSTALL REAR DOOR SCUFF PLATE
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
5. INSTALL REAR SEATBACK ASSEMBLY See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Installation
6. INSTALL REAR SEAT HEADREST ASSEMBLY RH See: Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
7. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY See: Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
8. INSTALL REAR SEAT HEADREST ASSEMBLY LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
9. INSTALL REAR SEAT CUSHION LOCK HOOK See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Installation
10. INSTALL REAR SEAT CUSHION ASSEMBLY See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Installation
12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation
13. PERFORM DIAGNOSTIC SYSTEM CHECK
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear
14. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System