HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(b) Disengage the guide.
(c) Disconnect the connector and remove the power seat switch.
11. REMOVE POWER SEAT SWITCH (w/ Memory)
(a) Remove the 3 screws.
(b) Disengage the guide.
(c) Disconnect the 2 connectors and remove the power seat switch.
Installation
SEAT: POWER SEAT SWITCH: INSTALLATION
1. INSTALL POWER SEAT SWITCH (w/o Memory)
(a) Connect the connector.
(b) Engage the guide.
(c) Install the power seat switch with the 3 screws.
2. INSTALL POWER SEAT SWITCH (w/ Memory)
(a) Connect the 2 connectors.
(b) Engage the guide.
(c) Install the power seat switch with the 3 screws.
3. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY See: Seats/Service and Repair/Overhaul/Front Seat Assembly/Reassembly
4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Seats/Service and Repair/Overhaul/Front Seat