HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
SEAT: LUMBAR SWITCH: INSTALLATION
1. INSTALL FRONT POWER SEAT LUMBAR SWITCH
(a) Install the front power seat lumbar switch to the front seat cushion shield with the 2 screws.
2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY See: Seats/Service and Repair/Overhaul/Front Seat Assembly/Reassembly
3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Seats/Service and Repair/Overhaul/Front Seat
Assembly/Reassembly
4. INSTALL RECLINING POWER SEAT SWITCH KNOB See: Seats/Service and Repair/Overhaul/Front Seat Assembly/Reassembly
5. INSTALL FRONT SEAT ASSEMBLY See: Seats/Service and Repair/Removal and Replacement/Front Seat Assembly/Installation
6. INSTALL REAR INNER SEAT TRACK BRACKET COVER See: Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Installation
7. INSTALL REAR OUTER SEAT TRACK BRACKET COVER See: Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Installation
8. INSTALL FRONT INNER SEAT TRACK BRACKET COVER See: Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Installation
9. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER See: Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Installation
10. INSPECT FRONT SEAT ASSEMBLY See: Seats/Service and Repair/Removal and Replacement/Front Seat Assembly/Installation
11. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System
12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation