HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
4. INSTALL INSTRUMENT SIDE PANEL RH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Upper Instrument Panel/Installation
5. INSTALL COWL SIDE TRIM BOARD RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Installation
7. INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
8. INSTALL FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal
and Replacement/Steering Pad/Installation
10. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System
11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Installation