HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(a) Using a clip remover, remove the 6 clips.
Text in Illustration
(b) Remove the screw.
(c) Remove the 5 front spoiler No. 2 retainers and front spoiler cover.
(d) Remove the grommet.
Installation
EXTERIOR PANELS / TRIM: FRONT SPOILER: INSTALLATION
1. INSTALL FRONT SPOILER COVER
HINT
When installing the front spoiler cover, heat the front bumper using a heat light.
Heating Temperature
NOTICE:
Do not heat the front bumper excessively.
(a) Install the grommet.
(b) Clean the front bumper surface.
(1) Using a heat light, heat the front bumper surface.
(2) Remove the double-sided tape from the front bumper.
(3) Wipe off any tape adhesive residue with cleaner.
(c) Install the front spoiler cover.
(1) Using a heat light, heat the front bumper and front spoiler cover.
(2) Remove the release paper from the front spoiler cover.
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install a new front spoiler cover with the screw and 6 clips.
(4) Install the 5 front spoiler No. 2 retainers.
2. INSTALL FRONT SPOILER COVER LH