HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(a) Remove the 2 nuts.
(b) Disengage the 5 pins to remove the rear upper spoiler sub-assembly.
Text in Illustration
Installation
EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION
1. INSTALL REAR UPPER SPOILER SUB-ASSEMBLY
HINT
When installing a new rear upper spoiler sub-assembly, heat the vehicle body using a heat light.
Heating Temperature
NOTICE:
Do not heat the luggage compartment door excessively.
(a) Clean the luggage compartment door surface.
(1) Using a heat light, heat the luggage compartment door surface.
(2) Remove the double-sided tape from the luggage compartment door.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install the rear upper spoiler sub-assembly.
(1) Using a heat light, heat the vehicle body and rear upper spoiler sub-assembly.
(2) Remove the release paper from the rear upper spoiler sub-assembly.
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 5 pins to install a new rear upper spoiler sub-assembly.