HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Removal
BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE POWER STEERING ECU ASSEMBLY
HINT
Refer to the procedure up to Remove Power Steering ECU Assembly See: Relays and Modules/Relays and Modules - Steering and
Suspension/Relays and Modules - Steering/Steering Control Module/Service and Repair/Removal.
3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY
HINT
Refer to the procedure up to Remove Brake Pedal Stroke Sensor Assembly See: Antilock Brakes / Traction Control
Systems/Braking Sensor/Switch/Service and Repair/Removal.
4. REMOVE STOP LIGHT SWITCH ASSEMBLY See: Lighting and Horns/Brake Light Switch/Service and Repair/Removal
5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
6. REMOVE BRAKE PEDAL RETURN SPRING
(a) Remove the brake pedal return spring from the brake pedal support sub-assembly and push rod pin.
7. REMOVE COLUMN HOLE COVER SILENCER SHEET
(a) Turn back the floor carpet.
(b) Remove the 2 clips and column hole cover silencer sheet.