HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Brake Pedal Assy: Overhaul
Disassembly
BRAKE SYSTEM (OTHER): BRAKE PEDAL: DISASSEMBLY
1. REMOVE BRAKE PEDAL SUB-ASSEMBLY
(a) Remove the brake pedal shaft and nut to remove the brake pedal sub-assembly from the brake pedal support sub-assembly.
2. REMOVE BRAKE PEDAL SHAFT COLLAR
(a) Remove the brake pedal shaft collar from the brake pedal sub-assembly.
3. REMOVE BRAKE PEDAL BUSHING
(a) Remove the 2 brake pedal bushings from the brake pedal sub-assembly.
4. REMOVE BRAKE PEDAL PAD
Reassembly
BRAKE SYSTEM (OTHER): BRAKE PEDAL: REASSEMBLY
1. INSTALL BRAKE PEDAL PAD
2. INSTALL BRAKE PEDAL BUSHING
(a) Apply lithium soap base glycol grease to 2 new brake pedal bushings.
(b) Install the 2 brake pedal bushings to the brake pedal sub-assembly.
3. INSTALL BRAKE PEDAL SHAFT COLLAR
(a) Install the brake pedal shaft collar to the brake pedal sub-assembly.
4. INSTALL BRAKE PEDAL SUB-ASSEMBLY
(a) Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.
Torque : 17 Nm (176 kgf-cm, 13 ft-lbf)