HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Distance Sensor: Service and Repair
Installation
CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION
1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Temporarily install the millimeter wave radar sensor assembly with the 3 nuts.
(b) Tighten the 3 nuts in the order shown in the illustration to install the millimeter wave radar sensor assembly.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(c) Connect the connector.
2. INSTALL FRONT BUMPER ASSEMBLY
(a) Install the Front Bumper Assembly See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation.
3. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Adjustments