HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Auxiliary Water Pump: Service and Repair
Installation
HEATING / AIR CONDITIONING: HEATER WATER PUMP: INSTALLATION
1. INSTALL HEATER WATER PUMP ASSEMBLY
(a) Install the heater water pump assembly with the 2 nuts.
Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)
(b) Connect the connector.
(c) Install the 2 heater water hoses with the 2 clips.
2. INSTALL AIR CLEANER CASE See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
4. INSPECT FOR COOLANT LEAK (for Engine) See: Testing and Inspection/Component Tests and General Diagnostics/Cooling System
5. INSPECT RESERVOIR TANK ENGINE COOLANT LEVEL (for Engine) See: Testing and Inspection/Component Tests and General
Diagnostics/Cooling System