HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(e) CALCULATION EXAMPLE (Intake):
*
Measured intake valve clearance = 0.40 mm (0.0157 in.)
*
(Measured - Specification = Excess clearance)
*
0.40 mm (0.0157 in.) - 0.24 mm (0.00945 in.) = 0.16 mm (0.00630 in.)
*
Measured used lifter thickness = 5.250 mm (0.2067 in.)
*
New lifter thickness = 5.410 mm (0.2130 in.)
*
(Excess clearance + Used lifter thickness = Ideal new lifter)
*
0.16 mm (0.00630 in.) + 5.250 mm (0.2067 in.) = 5.410 mm (0.2130 in.)
*
Closest new lifter = 5.420 mm (0.2134 in.)
*
Select No. 42 lifter
(f) Select a new lifter with a thickness as close as possible to the calculated values.
HINT
*
Lifters are available in 35 sizes in increments of 0.020 mm (0.000787 in.), from 5.060 to 5.740 mm (0.1992 to 0.2260 in.).
*
The identification number inside the valve lifters shows the value to 2 decimal places. (The illustration shows 5.420 mm (0.2134
in.))
(g) Valve lifter selection chart (intake).