HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
New Lifter Thickness
Standard exhaust valve clearance (cold):
0.38 to 0.48 mm (0.0150 to 0.0189 in.)
(k) EXAMPLE:
The 5.340 mm (0.2102 in.) lifter is installed, and the measured clearance is 0.510 mm (0.0201 in.). Replace the 5.340 mm (0.2102 in.) lifter
with a new No. 42 lifter.
(m)Install the selected valve lifter.
(n) Install the camshaft.
HINT
See the steps from Install Camshaft through Install No. 1 Chain Tensioner See: Camshaft, Lifters and Push Rods/Camshaft/Service
and Repair/Installation.
10. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Installation
11. INSTALL IGNITION COIL ASSEMBLY See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Installation