HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
HINT
Install the gasket so that the protrusion is located as shown in the illustration.
(d) Check that there is clearance between the rod end and the lever.
(e) Connect the 2 water hoses.
2. ADD ENGINE COOLANT (for Engine) See: Cooling System/Coolant/Service and Repair/Coolant (for Engine)
3. INSPECT FOR COOLANT LEAK See: Cooling System/Testing and Inspection/Component Tests and General Diagnostics/Cooling System
4. INSTALL FRONT NO. 3 ENGINE UNDER COVER
5. INSTALL NO. 1 ENGINE UNDER COVER