HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Compressor HVAC: Testing and Inspection
HEATING / AIR CONDITIONING: COMPRESSOR: INSPECTION
1. INSPECT COMPRESSOR WITH MOTOR ASSEMBLY
CAUTION:
*
Because the compressor has a high-voltage circuit, wear insulated gloves and pull out the service plug grip to cut off the
high-voltage circuit before inspection.
*
Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
NOTICE:
Do not start the engine with the service plug grip removed because it may cause a malfunction.
(a) Disconnect the compressor with motor assembly connector.
(b) Using a megohmmeter, measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(c) If the resistance is not as specified, replace the compressor with motor assembly.