HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
_hybrid/Page-2076012.png)
39. REMOVE NO. 4 HEATER TO REGISTER DUCT
(a) Remove the clip and No. 4 heater to register duct from the instrument panel reinforcement assembly.
40. REMOVE AIR CONDITIONING UNIT ASSEMBLY
NOTICE:
*
Be sure to support the air conditioning unit assembly when removing it because failure to do so may cause the bracket of the air
conditioning unit assembly to break.
*
When disassembling the air conditioning unit, eliminate static electricity by touching the vehicle body to prevent the components
from being damaged.
(a) Disengage each clamp.
(b) Disengage the drain cooler hose.
(c) Remove the bolt, nut and air conditioning unit assembly.
(d) Disengage the clamp and disconnect the connector.
Installation
