HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: REMOVAL
1. PRECAUTION (w/ Navigation System)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
3. REMOVE LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Removal
5. REMOVE AIR CONDITIONING PRESSURE SENSOR
(a) Disconnect the connector.
(b) Remove the air conditioning pressure sensor.
NOTICE:
Do not deform the piping.