HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Text in Illustration
NOTICE:
After installing the grommet, make sure that there is no clearance between the grommet and body.
(h) Connect the battery pack wire connector and clamp.
(i) Connect the battery room ventilation hose.
(j) Connect the frame wire clamp.
15. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
(a) Install the child restraint seat anchor bracket sub-assembly LH with the 2 bolts.
Bolt A - Torque : 20 Nm (204 kgf-cm, 14 ft-lbf)
Bolt B - Torque : 19 Nm (194 kgf-cm, 13 ft-lbf)
16. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH
(a) Install the child restraint seat anchor bracket sub-assembly RH with the 2 bolts.
Bolt A - Torque : 20 Nm (204 kgf-cm, 14 ft-lbf)
Bolt B - Torque : 19 Nm (194 kgf-cm, 13 ft-lbf)
(b) Connect the wire harness protector clamp.
17. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT
(a) Insert the No. 1 hybrid battery exhaust duct with the 2 clips.
NOTICE:
Ensure that the duct is installed securely.
18. INSTALL NO. 2 HYBRID BATTERY EXHAUST DUCT
(a) Insert the No. 2 hybrid battery exhaust duct with the clip.