lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Hybrid Systems - Electrical Safety Precautions|Page 2678 > < Hybrid Systems - Electrical Safety Precautions|Page 2676
Page 5
background image

3. Connect the negative (-) terminal. 

Torque: 6.0 N*m (61 kgf*cm, 4.4 ft*lbf)

4. Close the battery cover and install the luggage compartment floor mat.

5. Close the trunk.

Every Two Months

Cycle vehicle to "READY" ON:

NOTE

^

When the remaining capacity of the HV battery is low, the gasoline engine automatically starts and the HV battery is charged. The 12-volt
auxiliary battery is also charged by the HV battery regardless of the gasoline engine operation.

^

Be sure to reconnect the negative (-) terminal of the auxiliary battery before performing this procedure.

1. Park the vehicle in open air or connect the exhaust extraction hose to the exhaust pipe.

2. Apply the parking brake.

3. With the brake pedal depressed push the POWER switch and check that the "READY" light in the meter illuminates when the hybrid system starts

(the "READY" light is ON).

4. Turn OFF all lights and accessories.

5. Check that the shift lever is in the "P" position.

Hybrid Systems - Electrical Safety Precautions|Page 2678 > < Hybrid Systems - Electrical Safety Precautions|Page 2676