HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Hybrid Battery Service Switch: Service and Repair
Removal
HYBRID / BATTERY CONTROL: SERVICE PLUG GRIP: REMOVAL
1. PRECAUTION
HINT
See: Service Precautions.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT See: Starting and Charging/Battery/Service and Repair/Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Starting and Charging/Battery/Service and Repair/Removal
4. REMOVE BATTERY SERVICE HOLE COVER
(a) Slide the latch and remove the service hole cover.
5. REMOVE SERVICE PLUG GRIP
CAUTION:
*
Wear insulating gloves.
*
Remove the service plug grip to interrupt the high voltage circuit at the time of inspection or repair.
*
Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are
servicing the vehicle.
*
All the high voltage wiring connectors are orange.
(a) Wear insulating gloves and remove the service plug grip after sliding up the lever of the service plug grip as shown in the illustration.
CAUTION:
*
Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are
servicing the vehicle.
*
After removing the service plug grip, do not touch the high voltage connectors or terminals for 10 minutes.
HINT
Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.