HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Audible Warning Device: Service and Repair
Removal
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: REMOVAL
NOTICE:
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or
any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or
open/close the doors while the battery is connected.
1. REMOVE POWER STEERING ECU ASSEMBLY
HINT
Refer to the procedure up to Remove Power Steering ECU Assembly See: Relays and Modules/Relays and Modules - Steering and
Suspension/Relays and Modules - Steering/Steering Control Module/Service and Repair/Removal.
2. REMOVE SKID CONTROL BUZZER ASSEMBLY
(a) Remove the skid control buzzer assembly.
(b) Disconnect the skid control buzzer connector.