HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Removal
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REMOVAL
1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE TOOL WITH STAY BOX SUB-ASSEMBLY
3. REMOVE REAR FLOOR FINISH PLATE
(a) Using a clip remover, remove the 3 clips.
(b) Disengage the 4 clips and 2 guides, and remove the rear floor finish plate.
4. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY See: Trunk Lamp/Service and Repair/Removal
5. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
(a) Remove the 2 No. 2 luggage compartment trim hooks as shown in the illustration.
(b) Disengage the 4 claws (A).