HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
(c) Disengage the grommet.
(d) Remove the 3 screws.
(e) Disengage the 2 pins and remove the rear combination light assembly.
Installation
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) Engage the 2 pins.
(b) Install the rear combination light assembly with the 3 screws.
Torque : 1.7 Nm (17 kgf-cm, 15 in-lbf)
(c) Engage the grommet.
(d) Connect the connector.
(e) Turn the lower back door stopper cushion in the direction indicated by the arrow shown in the illustration to install it.
2. INSTALL REAR LIGHT COVER
(a) Engage the 6 claws to install the 2 rear light covers.
3. INSTALL REAR BUMPER ASSEMBLY
(a) Install the rear bumper assembly See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and Replacement/Installation.
4. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER
(a) Install the inner luggage compartment trim cover with the 3 clips.
5. INSTALL ROPE HOOK
(a) Engage the 2 claws and install the rope hook.
6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
(a) Engage the 4 fasteners.