HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Brake Lamp Relay: Service and Repair
Removal
LIGHTING (EXT): STOP LIGHT CONTROL RELAY: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
2. REMOVE FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal
3. REMOVE COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
4. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Upper Instrument Panel/Removal
6. REMOVE NO. 1 SWITCH HOLE BASE See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Upper Instrument Panel/Removal
7. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY
(a) Using a clip remover, disengage the clamp.
(b) Disconnect the connector and remove the stop light control ECU assembly.