HS 250h L4-2.4L (2AZ-FXE) Hybrid (2010)
Door Switch: Service and Repair
Front Door Courtesy Switch
Components
LIGHTING (INT): FRONT DOOR COURTESY SWITCH: COMPONENTS
Removal
LIGHTING (INT): FRONT DOOR COURTESY SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
2. REMOVE REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. REMOVE CENTER PILLAR LOWER GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
4. REMOVE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Using a T30 "TORX" socket wrench, remove the bolt and front door courtesy light switch assembly.
Installation
LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION
1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)